Asphalt driveways, parking lots and sealcoating around Leander, TXAsphalt paving and sealcoating in Leander
Pavement Solutions
Asphalt paving contractor in Round Rock, TX
Call (512) 369-2450 Request a Quote

How Much Does an Asphalt Driveway Cost in Texas?

An asphalt driveway in the Austin area costs $4.50 to about $8 per square foot on average. That is the range on the Austin page of a national cost guide, updated in 2026. An older Austin guide from 2022 listed $3 to $6, with removal of an old drive included. National cost guides from 2025 and 2026 put new asphalt at $5 to $13 per square foot installed.

At the Austin range, a 20 by 20 foot two-car driveway comes to about $1,800 to $3,200. These are market numbers, not our price list. The 2026 Austin page says a large share of the cost goes to digging and base work. That is why the base and the drainage come first in asphalt driveway paving.

What do national cost guides say an asphalt driveway costs?

National cost guides break a driveway into parts, with materials and labor together.

What you are paying forPublished range
New asphalt driveway, 2026 Austin page of a national guide$4.50 to about $8 per square foot
New asphalt with removal, 2022 Austin guide$3 to $6 per square foot
New asphalt driveway, national guides$5 to $13 per square foot
One driveway, national average$5,353; most pay $3,154 to $7,558
Tear out and replace an old driveway$4 to $10 in one guide, $8 to $15 in another
Asphalt overlay on a sound driveway$1 to $3 in one guide, $3 to $7 in another
Culverts or drains, where a site needs them$500 to $2,000

The guides do differ. One starts new asphalt at $5 per square foot and another at $7. Read any single number as one guide’s view.

What does a typical driveway size cost in the Austin area?

The table runs common sizes through the 2026 Austin range of $4.50 to $8.

DrivewaySquare feetAt $4.50 to $8 per square foot
One-car, 10 by 20 feet200$900 to $1,600
Two-car, 20 by 20 feet400$1,800 to $3,200
Two-car, 24 by 24 feet576about $2,600 to $4,600
Three-car, 24 by 36 feet864about $3,900 to $6,900
Long rural drive, 12 by 500 feet6,000$27,000 to $48,000

Small jobs can hit a minimum charge, which one guide puts at $2,000 or more. Read the long rural row as a rough planning range.

What drives the price of an asphalt driveway?

Size and shape. Bigger drives take more asphalt and more labor. One national guide adds 15% to 30% for curves and slopes.

The ground under it. One guide calls for 6 to 8 inches of compacted gravel base under the asphalt. Your soil decides how much digging that base takes. Federal soil surveys show two kinds of ground here.

In Leander and the Hill Country towns, the soil is thin over limestone. Under Leander’s center, soft limestone bedrock sits about 17 inches down. Some Hill Country soils hit hard rock at 8 to 12 inches. The 2022 Austin guide lists rocky soil and hardpan among its price raisers.

East toward Pflugerville and Hutto, the Blackland Prairie clays run deep. The survey rates one common blackland clay high for shrink and swell. When dry, it cracks up to 4 inches wide. One national guide notes that clay soils often need extra digging and base.

Removal. A remove and replace job pays for the tear-out first. One guide prices replacement at $8 to $15 per square foot, with $1 to $2 of that for removal. Thicker asphalt takes more work to break up, another guide notes.

Thickness. Most home driveways need 2 to 3 inches of asphalt, one guide says. Drives that carry heavy vehicles need 3 to 4 inches over an 8 to 10 inch base. Texas highway specs figure hot mix at 110 pounds per square yard for each inch. At 2 inches, a ton covers about 80 square feet.

Access. Hard-to-reach sites cost more, the 2022 Austin guide notes. The 2026 Austin page says grading to correct a slope pushes a job toward the high end.

Drainage. Drainage protects the base. The 2026 Austin page stresses drainage design, given the city’s heavy rain events and flash-flood potential. Where a site needs culverts or drains, another guide prices them at $500 to $2,000.

Permits. Where a drive meets a public road, the road’s owner usually wants a permit. Leander’s permit list includes driveways and culverts, and its fee table shows a $100 driveway culvert permit. Outside city limits, Williamson County calls for driveway culverts at least 18 inches across and 24 feet long. Drives onto state highways need a TxDOT permit.

Do tar and chip or crushed granite cost less than asphalt?

In the current national guides, tar and chip does. Crushed granite does too on the stone itself, though grading can close the gap.

SurfacePublished priceLife in the guides
Hot mix asphalt$4.50 to about $8 per square foot on the Austin page, $5 to $13 nationally15 to 30 years
Tar and chip seal$2 to $5 per square foot7 to 10 years
Crushed graniteabout $3.50 per square foot before grading, from one guide’s example7 to 10 years before it needs restoring

Tar and chip seal is hot asphalt sprayed on a prepared base, then covered with chip stone and rolled. One 2025 guide puts it 30% to 40% below asphalt. For a 12 by 500 foot stretch, that guide lists $10,000 to $30,000. The Austin asphalt range puts the same 6,000 square feet at $27,000 to $48,000.

Crushed granite driveways, which many in Central Texas call decomposed granite, cost less for the stone itself. One 2026 guide prices a 10 by 50 foot crushed granite drive at $1,750 installed. Leveling and grading add $1,500 to $2,000 in that guide, about what the granite costs. The granite thins under tires and rain, so plan on topping it up.

Check the rules before you pick a surface. Inside Georgetown city limits, the development code requires a paved surface for driveways. Its definition counts surface treatments such as tar and chip, but not gravel or crushed granite. Where a drive meets a Travis County road, the county allows only concrete or asphalt on the approach.

Does an asphalt overlay cost less than a new driveway?

Often, when the base under the old asphalt is still sound. Cost guides disagree on what an asphalt overlay costs. One 2025 guide lists $1 to $3 per square foot, and a 2026 guide lists $3 to $7.

Both sit below new asphalt. One guide says an overlay typically saves 20% to 30% over full replacement. Widespread holes or spiderweb cracks mean replacement is the better path, another guide says.

How do you get a real number for your driveway?

The paving prices above are market ranges. Your drive has its own length and its own ground.

We pave new asphalt driveways and replace worn ones across Leander and the Austin area. Leander sits at the center of our service area. The drainage the base needs is part of the job.

We look at the job and put a free quote in writing. Call or text (512) 369-2450, or see how we build a new asphalt driveway.

Frequently asked questions

How much does an asphalt driveway cost in the Austin area?
A 2026 national cost guide's Austin page lists asphalt driveways at $4.50 to about $8 per square foot. An older 2022 Austin guide listed $3 to $6, removal included. At the 2026 range, a 20 by 20 foot two-car driveway comes to about $1,800 to $3,200. These are market numbers, not our price list.
Why do asphalt driveway quotes vary so much?
Most of the spread sits under the asphalt, in the base and the drainage. One guide adds $1 to $2 per square foot to tear out an old drive. Another adds 15% to 30% for curves and slopes. Small jobs can hit a minimum charge, which one guide puts at $2,000 or more.
How thick should an asphalt driveway be?
One national guide calls for 2 to 3 inches of asphalt over 6 to 8 inches of compacted gravel base. Drives that carry heavy vehicles need 3 to 4 inches over an 8 to 10 inch base. Thicker pavement takes more hot mix, so it costs more.
Can I pave over my old asphalt driveway to save money?
Often, if the base under it is still sound. Guides list an overlay at $1 to $3 per square foot or $3 to $7, depending on the guide. One says it typically saves 20% to 30% over full replacement. Widespread holes or spiderweb cracks point to replacement instead.
Does a tar and chip driveway cost less than asphalt?
Yes, in the current national guides. One puts tar and chip at $2 to $5 per square foot, 30% to 40% below asphalt. That guide lists its life at 7 to 10 years, against 15 to 30 for asphalt.
How much does a crushed granite driveway cost?
One national guide prices a 10 by 50 foot crushed granite driveway at $1,750 installed. Leveling and grading add $1,500 to $2,000 in that guide. The granite thins under traffic and rain, so plan on topping it up.
Is this what Pavement Solutions charges?
No. Every paving price on this page comes from national cost guides: market numbers, not our price list. Your price turns on your own drive and the ground under it. We look at the job and put a free quote in writing, so call or text (512) 369-2450.
Request a Quote

Get In Touch With Pavement Solutions

Tell us about the job with the form, or call or text (512) 369-2450. We get back to you and set a time to look at it.

Request a Quote

Tell us about the driveway or parking lot and where it is. We look at the job and put a free quote in writing.

Call (512) 369-2450