Asphalt Overlay
An asphalt overlay paves a fresh layer of hot mix asphalt over the pavement you already have. We mill the worn top first, then pave new asphalt over the existing surface.
Learn More
Sealcoating puts a thin coat of sealer over asphalt. It protects the surface from weather damage and the wear of daily use. A fresh coat also brings back the dark color that sun fades out. We handle driveway sealcoating for homeowners and parking lot sealcoating for businesses across Leander and the Austin area.
Sealcoating is where Pavement Solutions started, and the company grew from there into asphalt paving. Every sealcoating job starts with a thorough cleaning, and each crack gets filled by hand. Potholes and broken edges need asphalt repair before any sealer goes down.
Tell us about the driveway or parking lot and where it is. We look at the job and put a free quote in writing.
Your paving needs to be thoroughly cleaned before sealer goes on. Dirt and loose debris come off first, or the sealer bonds to dust instead of asphalt. A clean, dry surface gives the sealer something solid to grip.
Each crack needs to be filled by hand. Sealer can close small surface cracks, but open cracks need filler first. Left open, a crack lets rain reach the base under the asphalt. Industry guidance also warns against overfilling, since extra material left on the surface causes most complaints about crack filler.
We often recommend two coats of sealer. One sealer maker's spec puts the minimum at two. Too much sealer at once can track onto shoes and tires. Two thinner coats build the layer up in steps.
Asphalt dries out and turns brittle with age. Long Central Texas summers bake the surface, and the black finish fades to gray. Heavy storms then push water into any open crack. Water that reaches the base softens it, and potholes follow.
Asphalt industry guidance says to sealcoat as soon as the surface looks dry and brittle. Small surface cracks and loose stones on top are the other signs to watch. Sealcoating at that stage protects the asphalt while the cracks are still small.
Sealer protects asphalt that is still sound. When cracks spread across the whole surface, an asphalt overlay may be the better job. We look at the surface before we quote and tell you which work it needs.
Parking lot sealcoating follows the same steps on a bigger surface. The lot gets a thorough cleaning, and each crack is filled by hand. The sealer then guards the asphalt against weather and the wear of daily traffic.
Sealer coats the old stall lines along with the asphalt. Once it cures, parking lot striping puts the layout back.
We sealcoat parking lots for businesses in Leander and across the Austin area, along with larger residential parking areas. Leander sits at the center of our service area, which runs about 60 miles out. Call or text (512) 369-2450 to set up a free quote.
Call or text for a written quote. We work about 60 miles around Leander across Central Texas.
(512) 369-2450From the first call or text to the finished work, here is how it goes.
Call or text (512) 369-2450, or send the form. Tell us what needs work and where the property is.
We measure the area and check the surface that is there now. We also look at how water drains across it.
We put a free quote in writing. Once you say go, we set a work date with you.
We grade the ground and prepare the base for new paving. On worn asphalt, we mill or patch the bad areas first.
We pave with hot mix asphalt or lay the chip seal, then compact the surface. Sealcoating or striping comes last when the job calls for it.
Common questions about sealcoating around Leander and the Austin area. If yours is not here, call or text and ask.
An asphalt overlay paves a fresh layer of hot mix asphalt over the pavement you already have. We mill the worn top first, then pave new asphalt over the existing surface.
Learn More
Asphalt restoration brings worn driveways and parking lots back to good condition. We check whether your pavement is worth restoring, then combine the repairs and new asphalt it needs.
Learn More
Tar and chip seal is hot asphalt emulsion topped with chip stone and rolled in. It gives driveways and parking lots a textured stone finish with good grip.
Learn MoreBefore any paving work begins, we level and grade the surface so water flows away from it. That goes for driveways with hills and curves too.
Before we sealcoat, we clean the pavement and fill each crack by hand. We often recommend two coats of sealant.
We look at the job before we price it. Then the quote comes to you in writing.
Real reviews from real jobs, 23 reviews on Google.
Pavement Solutions did a wonderful job in asphalting our gravel driveway. Professional, courteous service at a reasonable price. We highly recommend them.
Pavement Solutions has been responsive and professional both times they have completed projects for me. I love the work they’ve done. Saving their number!! Highly recommend!!
We had it chip sealed and put chip seal around our barn for mud control and it looks fantastic and is very well done. The entire process was done so well. They are honest, hardworking, polite, great price and do great work. Someone you can trust.
Tell us about the job with the form, or call or text (512) 369-2450. We get back to you and set a time to look at it.
Tell us about the driveway or parking lot and where it is. We look at the job and put a free quote in writing.