Driveway Grading
We level and slope the ground so water flows away from your driveway. The grade goes in before any new surface goes down.
Learn More
A crushed granite driveway gives your property a natural stone surface you can drive on. In Central Texas, many people call it decomposed granite, or DG. Pavement Solutions builds new crushed granite driveways and rebuilds worn ones. Leander sits at the center of our service area, which reaches across the Austin area.
Every job starts with the ground under the stone. We grade the drive so rain runs off, then build the base the granite sits on. That is the same driveway grading that comes before our paving work. We can source the crushed granite too, so one company handles the job from the dirt up.
Tell us about the driveway or parking lot and where it is. We look at the job and put a free quote in writing.
Many Hill Country lots are rocky and sloped, so the first step is the grade. We level and shape the drive so water flows away from the surface. On a rebuild, we fix the old grade before anything new goes down.
Next comes the base, the layer that carries the weight. Federal highway guidance for gravel roads says a base needs strength and good drainage. The crushed granite goes on top as the surface you drive and walk on.
The same guidance says a surface layer needs enough fine material to bind it together. Without those fines, the stone stays loose and is hard to keep in shape.
It can, as long as water has a way off the drive. Central Texas is known as Flash Flood Alley, and heavy downpours are common here. In the Hill Country, thin soils and steep hills send that rain downhill fast. On clay soils, little more water soaks in once the ground is wet.
Loose stone moves when water runs across it. A gravel surface sheds rain best with a crown, a slight rise down the middle. Without one, water sits in puddles and softens the surface, and ruts can follow.
So we grade a crushed granite driveway to shed water before it soaks in. Where runoff crosses the drive, a culvert under it can carry the water. Where it runs alongside, a shallow swale can do the job. That is part of our driveway drainage work.
Every gravel driveway loses some stone over time. Traffic pushes it toward the edges, and hard rain carries some off. The federal gravel road guide lists new gravel and regrading as upkeep that gravel roads need.
A crushed granite driveway works the same way. When the granite thins out or shifts, we replenish the layer. A top-up before ruts reach the base is a smaller job than a rebuild.
Deep ruts or a soft base call for a rebuild. We regrade the drive and repair the base, then lay new crushed granite. If you would rather pave it, see our asphalt driveway paving service.
Call or text for a written quote. We work about 60 miles around Leander across Central Texas.
(512) 369-2450From the first call or text to the finished work, here is how it goes.
Call or text (512) 369-2450, or send the form. Tell us what needs work and where the property is.
We measure the area and check the surface that is there now. We also look at how water drains across it.
We put a free quote in writing. Once you say go, we set a work date with you.
We grade the ground and prepare the base for new paving. On worn asphalt, we mill or patch the bad areas first.
We pave with hot mix asphalt or lay the chip seal, then compact the surface. Sealcoating or striping comes last when the job calls for it.
Common questions about crushed granite driveways around Leander and the Austin area. If yours is not here, call or text and ask.
We level and slope the ground so water flows away from your driveway. The grade goes in before any new surface goes down.
Learn More
We fix driveways and parking lots that hold water or wash out in hard rain. Swales and French drains move runoff off the pavement, and culverts carry ditch water under the drive.
Learn More
Asphalt milling grinds the worn top layer off a driveway or parking lot with a skid steer planer. It makes room for new asphalt at the right height.
Learn MoreBefore any paving work begins, we level and grade the surface so water flows away from it. That goes for driveways with hills and curves too.
Before we sealcoat, we clean the pavement and fill each crack by hand. We often recommend two coats of sealant.
We look at the job before we price it. Then the quote comes to you in writing.
Real reviews from real jobs, 23 reviews on Google.
Pavement Solutions did a wonderful job in asphalting our gravel driveway. Professional, courteous service at a reasonable price. We highly recommend them.
Pavement Solutions has been responsive and professional both times they have completed projects for me. I love the work they’ve done. Saving their number!! Highly recommend!!
We had it chip sealed and put chip seal around our barn for mud control and it looks fantastic and is very well done. The entire process was done so well. They are honest, hardworking, polite, great price and do great work. Someone you can trust.

What does an asphalt driveway cost in Texas? Published Austin area and national ranges per square foot, plus what moves the price on your driveway.
Read more →
Chip seal vs asphalt for a Texas driveway: national cost ranges, grip on slopes, upkeep and lifespan, and when each one fits a Central Texas drive.
Read more →Tell us about the job with the form, or call or text (512) 369-2450. We get back to you and set a time to look at it.
Tell us about the driveway or parking lot and where it is. We look at the job and put a free quote in writing.