Asphalt Repair
Pothole repair and crack filling for asphalt driveways and parking lots. We patch damaged spots with hot mix asphalt and fill each crack by hand.
Learn More
Parking lot paving is the commercial side of our work at Pavement Solutions. We put in new asphalt parking lots and replace old lots that have failed. Each lot is planned around the property, with a layout that improves the flow of traffic. As an asphalt paving contractor in Leander, we serve businesses across the Austin area.
We also handle parking lot repair on lots already in use. Potholes and cracks get spot repairs, or the whole surface gets a new asphalt layer. Once a lot is paved, parking lot striping marks the stalls and arrows. Call or text (512) 369-2450 for a free quote.
Tell us about the driveway or parking lot and where it is. We look at the job and put a free quote in writing.
A new lot starts with the layout. We plan the drive lanes and the stalls around how cars and trucks move through the property. On a replacement job, the old asphalt comes out first. Then the ground gets graded, and a layer of road base is spread and compacted.
The grade decides where rain goes. Asphalt industry guidance calls for a slope of at least 1.5 percent on parking lots. Under the federal ADA Standards, accessible stalls and their aisles may slope no more than 1:48, about 2 percent. That narrow range gets set at the grading stage, before any asphalt goes down.
Next, the hot mix asphalt goes down and gets compacted while it is still hot. Lanes where garbage trucks and delivery trucks turn take the most stress. Those lanes may call for thicker asphalt than the parking stalls.
The answer sits under the surface. A pothole or a few cracks in a lot with a sound base call for spot repairs. The damaged area is patched with new hot mix asphalt. A pothole left open lets more water into the base, and the hole grows.
Where cracks link up like an alligator's back, the support below has given way. That area gets cut out and the base under it gets rebuilt. Then new asphalt fills the hole. Crack filling alone does little once that pattern shows.
When wear is spread across the lot but the base is still sound, a new layer can do the job. That is an asphalt overlay, a fresh layer of asphalt over the existing pavement. If damage runs through most of the lot, replacing it can be the more cost-effective choice.
Federal weather data for Austin's Camp Mabry station shows about 111 days a year at 90 degrees or hotter. Long, hot summers age asphalt faster. The surface fades and dries out, and small cracks open.
Then rain finds the cracks. Water softens the base below, and traffic breaks the weak spot into a pothole. East of Austin, the black clay of the Blackland Prairie swells when wet and shrinks when dry. That movement works on pavement from below.
Parking lot maintenance slows that wear down. Cracks get filled by hand before water reaches the base. Sealcoating renews a surface that has turned dry and brittle with age. Faded stalls get repainted so drivers can read them again.
Call or text for a written quote. We work about 60 miles around Leander across Central Texas.
(512) 369-2450From the first call or text to the finished work, here is how it goes.
Call or text (512) 369-2450, or send the form. Tell us what needs work and where the property is.
We measure the area and check the surface that is there now. We also look at how water drains across it.
We put a free quote in writing. Once you say go, we set a work date with you.
We grade the ground and prepare the base for new paving. On worn asphalt, we mill or patch the bad areas first.
We pave with hot mix asphalt or lay the chip seal, then compact the surface. Sealcoating or striping comes last when the job calls for it.
Common questions about parking lot paving around Leander and the Austin area. If yours is not here, call or text and ask.
Pothole repair and crack filling for asphalt driveways and parking lots. We patch damaged spots with hot mix asphalt and fill each crack by hand.
Learn More
Driveway and parking lot sealcoating that starts with a thorough cleaning and every crack filled by hand. We often recommend two coats of sealer to guard the asphalt from weather and daily wear.
Learn More
An asphalt overlay paves a fresh layer of hot mix asphalt over the pavement you already have. We mill the worn top first, then pave new asphalt over the existing surface.
Learn MoreBefore any paving work begins, we level and grade the surface so water flows away from it. That goes for driveways with hills and curves too.
Before we sealcoat, we clean the pavement and fill each crack by hand. We often recommend two coats of sealant.
We look at the job before we price it. Then the quote comes to you in writing.
Real reviews from real jobs, 23 reviews on Google.
Pavement Solutions did a wonderful job in asphalting our gravel driveway. Professional, courteous service at a reasonable price. We highly recommend them.
Pavement Solutions has been responsive and professional both times they have completed projects for me. I love the work they’ve done. Saving their number!! Highly recommend!!
We had it chip sealed and put chip seal around our barn for mud control and it looks fantastic and is very well done. The entire process was done so well. They are honest, hardworking, polite, great price and do great work. Someone you can trust.
Tell us about the job with the form, or call or text (512) 369-2450. We get back to you and set a time to look at it.
Tell us about the driveway or parking lot and where it is. We look at the job and put a free quote in writing.